Safaricom clients in Kenya ought to appreciate limitless free web on their cell phone with the guide this new 2021 Updated settings and the Droid VPN application, note that you don't have to buy in to information to partake in this Unlimited free web on Safaricom, with this settings you peruse the web complementary with no information membership or broadcast appointment top up.
This free Safaricom Kenya free internet settings works out of the field, though you would possibly need a few endurance to allow the connection to stabilize
Most users has reported that this new settings works well with users who their Internet IP starts with 196.xxx, or 10xx or when 105.xx, you can easily check your default internet address with apps like the HTTP Injector VPN, Anonytun VPN, to do that just open any of the apps and locate the at the top upper section of the app.
As a disclaimer, note that free internet tweaks shared here are for educational purposes only, to alert the ISP about the loopholes available on their network at the same time providing free internet for users who utilize it at the moment.
Requirements for Safaricom Kenya Unlimited Free Internetet Via Droid VPN
- An Safaricom Kenya sim card with zero data and call credit
- An Android device, iOS or PC
- Your Droid VPN (download from here )
- The configuration settings below
Follow the instructions below to set up your Droid VPN for free internet Surfing.
New May 2021 Updated Settings
Auto port scan: Tick
Remote UDP port: 80
Local UDP port: 465
Choose UDP Mode: Mode 1
TCount: 0
RCount: 3
5. Now return back, select any server and Connect and enjoy
Or
Auto port scan: Tick
Remote UDP port: 8080
Local UDP port: 443
Choose UDP Mode: Mode 1
TCount: 0
RCount: 03
5. Now return back, select any server and Connect
Click on Settings and then go to UDP Settings
Now set it as follows:
Auto port scan: Tick
Remote UDP port: 8080
Local UDP port: 443
Choose UDP Mode: Mode 1
TCount: 0
RCount: 03
3~ Now return back, select a server and Connect and enjoy, if it fails to connect select another server and reconnect
Click on Settings and then go to TCP and HTTP
~Then set it as shown below:
Remote port: 53
Local TCP port: 0
Send HTTP Headers On TCP: Tick
Set HTTP Headers: Tick
Configure the Generator settings as shown below below:
Host: www.safaricom.com
Request method: Connect
Injection method: Normal
Front Query: Tick
Forward Host: Tick
Reverse Proxy: Tick
Keep Alive: Tick
User-Agent: Tick
Click on Generate, Validate and then Save
Then go back and select any server and connect
Use this second settings if the new settings didn’t work for any reason
~Click on Settings again and then go to UDP Settings
~Then set it as shown below:
Remote UDP port: 8080
Local UDP port: 0
Choose UDP Mode: Mode 1
TCount: 1
RCount: 3
Remote UDP port: 5432
Local UDP port: 0
Choose UDP Mode: Mode 1
TCount: 1
RCount: 3
~Tunnel MTU size: 900
Or use this second settings
Remote UDP port: 53
Local UDP port: 0
Choose UDP Mode: Mode 1
TCount: 30000
RCount: 14
~Tunnel MTU size: 900
Then return Back, connect and enjoy
Note:if UDP port 5432 and Local Port 0 is not working use UDP port 443, 115, 53 and Local Port 8080, 80 it will surely work..
Remember to select another server if it fails to connect
0 Comments